At Patriot Pool Heating, we want to ensure that the outcome of every job we perform is nothing short of perfection. That’s why we start with a thorough analysis of your specific site, your current systems and the efficiency that you are regularly obtaining. ONLY THEN do we present a well thought out plan to improve the function and reliability of your pump / heater system.
Please take a look at some of more recent commercial upgrade projects.
An indoor pool facility containing a lap pool at 31,000 gallons, a therapy at 21,000 gallons and a spa at 1200 gallons was going under remodeling. The original system had one heater for each pool at 250,000 Btu each. Due to flow issues and heating sizing the facility was having continuing failures. We installed two U.S. Boiler K-2 180,000 Btu boilers connected to an individual heating exchanger for each pool. The system gives them the ability to have fast recovery times during maintenance and back-washing. Modulating boilers produce the correct amount of heat based on demand. We were able to reduce from 750,000 Btu to 360,000 Btu. With this setup they gained the ability to have redundancy in case one of the heaters were to fail. Since both heaters are setup as one unit, if one fails the other one will take over.
We were called into the facility as the existing pool heater and supporting systems were leaking and failing. After a site survey and analysis we determined the system would need to be gutted and a new heater installed. When confronted with an issue such as this, we make sure to change out the entire system to make sure the environment is working as intended. We made sure to do a direct swap with the direct fire unit while also re-piping as necessary. What was once a leaking, non-functional mess was transformed into an efficient, clean system.
When Camelback Water Park needed a new pool heaters installed they called the experts at Patriot. If they can trust their massive waterpark to our team, just imagine what we can do to help your pool heating or pump room.